Performance Speci!cations
Parameter
Min Typ Max
Units
Condition
Additional Parameters
Crystal:
Swept quartz, AT, 3 point mount
Components:
Rework:
Class “S”Microelectronic element evaluation per Appendix B of MIL-PRF-55310D
In accordance with MIL-PRF-55310D, Class S
In accordance with MIL-PRF-55310D, Table III, including internal visual inspection per
MIL-STD-883, Method 2017, and PIND testing
Class “S”screened:
100% PIND testing:
In accordance with MIL-STD-883, Method 2020, Condition B. We may use a VI
approved material as a “getter”in our manufacturing process to help pass PIND.
Group A & B:
Leads:
100% Group A and 100% Group B testing
Must meet solderability requirements of MIL-STD-202, Method 208
Salt spray/salt atmosphere not included in this speci"cation.
Salt Spray:
Active die are of bi-polar technology inherently radiation tolerant. If required, VI will
provide a parts list and schematic (NDA required) for review of radiation hardness.
Radiation:
Shock: 100G, 6 ms per MIL-STD-202, Method 213, Condition C
Vibration: Sine: 20G to 2 kHz per MIL-STD-202, Method 204, Condition D
Random: 20 Grms overall to 2 kHz per MIL-STD-202, Method 214, Condition I-F
Standard shock and vibration
(survive; met by design, not tested):
Notes:
1.
Engineering models are "t, form and function representative of Flight Models and of
commercial construction using commercial parts of same generic type as Flight Models.
Completed oscillators are not screened, will not contain swept quartz, and are not suitable
for #ight, DPA, or RGA.
Vectron International • 267 Lowell Road, Hudson, NH 03051 • Tel: 1-88-VECTRON-1 • http://www.vectron.com
