1SMF16B
OUTLINE DIMENSIONS
Transient Voltage Suppressor - Surface Mounted
SOD-123FL
CASE 498-01
ISSUE O
B
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
L
E
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSIONS A AND B DO NOT INCLUDE MOLD
FLASH.
4. DIMENSIONS D AND J ARE TO BE MEASURED
ON FLAT SECTION OF THE LEAD: BETWEEN 0.10
AND 0.25 MM FROM THE LEAD TIP.
D
A
H
MILLIMETERS
DIM MIN MAX
INCHES
MIN
POLARITY INDICATOR
OPTIONAL AS NEEDED
MAX
0.071
0.114
0.039
0.043
0.037
0.004
0.008
0.150
8 °
C
A
B
C
D
E
H
J
1.50
2.50
0.90
0.70
0.55
0.00
0.10
3.40
0 °
1.80 0.059
2.90 0.098
1.00 0.035
1.10 0.028
0.95 0.022
0.10 0.000
0.20 0.004
3.80 0.134
K
L
K
L
8 °
0 °
J
RECOMMENDED FOOTPRINT FOR SOD-123FL
0.91
0.036
1.22
0.048
2.36
0.093
mm
4.19
inches
0.165
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make
changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all
liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or
specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be
validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others.
SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death
may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC
and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees
arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that
SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
Literature Fulfillment:
JAPAN: ON Semiconductor, Japan Customer Focus Center
2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051
Phone: 81-3-5773-3850
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada
Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada
Email: ONlit@hibbertco.com
ON Semiconductor Website: http://onsemi.com
For additional information, please contact your local
Sales Representative.
N. American Technical Support: 800-282-9855 Toll Free USA/Canada
1SMF16B/D
http://onsemi.com
4
