REVISION AL
QSH-XXX-XX-X-D-DP-XXX
No OF POSITIONS
OPTION
-A: ALIGNMENT PINS
C
-020, -040, -060,
**-080, **-100
(PER ROW)
DO NOT
SCALE FROM
THIS PRINT
(USE QSH-30-01-D-XX-A,
SEE FIG 2)
-GP: GUIDE POSTS
(USE QSH-30-01-D-XX-GP,
SEE FIG 4)
-LC: LOCKING CLIPS(SEE NOTE 12)
(USE LC-08-TM-01, SEE FIG 1)
-K: POLYIMIDE FILM PAD
(USE K-DOT-.325-.450-.005, SEE FIG. 3)
-TR: TAPE & REEL (60 POS MAX)
-TY: TRAY PACKAGING
{(No OF POS / 20) x .7875[20.003]} + .050[1.27] REF 61.28
9 EQ SPACES @ .059 [1.50] REF
LEAD STYLE
-01: .1280 [3.251]
PLATING SPECIFICATION
(SEE NOTE 11)
-F: 3µ" FLASH SELECTIVE IN CONTACT AREA,
MATTE TIN ON TAIL
(USE T-1G2-01-F) (SEE NOTE 9)
-L: 10µ" LIGHT SELECTIVE GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
.7875 20.00
(TYP)
(NOT AVAILABLE WITH -TR)
-FL: FRICTION LOCKS
(SEE FIG 5, SHEET 3)
02
01
(USE T-1G2-01-L) (SEE NOTE 9)
-H: 30µ" HEAVY GOLD IN CONTACT AREA,
3µ" GOLD ON TAIL
(NOT AVAILABLE WITH -GP)
-RT1: RETENTION (MUST USE -A OPTION)
(USE QSH-30-01-D-XX-A-RT1
& SUB-SC-05-01-FF) (SEE FIG 6, SHEET 3)
(NOT AVAILABLE WITH -LC, -GP, OR -FL)
(NOT AVAILABLE WITH -080 & -100 POS)
-L: LATCHING
(SEE FIG 7, SHEET 4)
(USE QSH-30-01-D-XX-A-L)
(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1)
(USE T-1G2-01-G)
.245 6.22
REF
-C: 50µ" ELECTRO-POLISHED SELECTIVE GOLD
IN CONTACT AREA, MATTE TIN ON TAIL
(USE T-1G2-01-L) (SEE NOTE 9)
.659 16.73 REF
'A'
DIFFERENTIAL PAIRS
.037 0.93 REF
.059 1.50 REF
.006 0.15 REF
.285 7.24
REF
C-126-01-X CAN BE SUBBED
FOR C-126-21-X
** = SEE NOTE 10
ROW SPECIFICATION
-D: DOUBLE (USE QSH-30-01-D-XX)
.0197 0.500 REF
.150 3.81 REF
No OF BANKS
.0030 0.08 REF
+.005
-.001
+0.13
.165
4.19
-0.03
QSH-30-01-D-XX
C
+.0030
-.0010
+0.076
3.251
-0.025
"A"
C
.1280
.055 1.40
C
(SEE NOTE 2 & 5)
.120 3.05 REF
SEE TABLE 1
C-126-21-X
* SEE NOTE 11
.038 0.95 REF
.725 18.42 REF
"A"
LC-08-TM-01
.064 1.62 REF
.010 0.25
REF
T-1G2-01-X
.056 1.42 REF
.2950 7.493 REF
({(No OF POS / 20) x .7875[20.003]} + .005[.13]) .005[.13]
SECTION "A"-"A"
FIG 1
-LC: LOCKING CLIP OPTION SHOWN
NOTES:
C
1.
REPRESENTS A CRITICAL DIMENSION.
2. MAX VARIANCE: .002 [0.05]
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
3. MAX BURR ALLOWANCE: .0015 [0.038]
4. MINIMUM PUSHOUT FORCE: 4 OZ
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
5. DIM APPLIES TO GROUND PLANE AND CONTACT.
DECIMALS
ANGLES
2
6. MINIMUM GROUND PLANE RETENTION: 8 OZ
.XX: .01 [.3]
7. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
520 PARK EAST BLVD, NEW ALBANY, IN 47150
.XXX: .005 [.13]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
8. SUB-SC-05-01-XX RETENTION TO BE 1.0 LBF IN BODY.
.XXXX: .0020 [.051]
e-Mail info@SAMTEC.com
DESCRIPTION:
9. MAY SUB C-126-01-X for C-126-21-X.
SHEET SCALE: 3:2
MATERIAL:
DO NOT SCALE DRAWING
10. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS PLEASE
CONTACT SAMTEC INTERCONNECT PROCESSING GROUP.
11. FOR -80, -100 POSITIONS USE C-269-11-X. DO NOT SUB C-126.
12. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE –LC OPTION."
.5mm DIFFERENTIAL PAIRS HS SOCKET ASSEMBLY
DWG. NO.
INSULATOR: BLACK, LCP
FLAMMABILITY RATING: UL94VO
TERMINAL: PHOS BRONZE
GROUND PLANE: PHOS BRONZE
QSH-XXX-XX-X-D-DP-XXX
KEVIN B
06/13/00
SHEET 1 OF 4
BY:
F:\DWG\MISC\MKTG\QSH-XXX-XX-X-D-DP-XXX-MKT.SLDDRW
