AZ762T
AZ
16 AMP HIGH INRUSH
MINIATURE POWER RELAY
FEATURES
• Dielectric strength 5000 Vrms
• Low height: 15.7 mm
• 16 Amp switching
• Tungsten premake contact for extrem high inrush
• Isolation spacing greater than 10 mm
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E44211
• VDE certificate 40006031
CONTACTS
GENERAL DATA
Arrangement SPST (1 Form A)
Life Expectancy
Mechanical
Electrical
Minimum operations
5 x 106
1 x 104
Ratings
Resistive load:
Operate Time (max)
Release Time (max)
15 ms at nominal coil voltage
Max. switched power: 4000 VA
Max. switched current: 16 A
8ms at nominal coil voltage
(with no coil suppression)
Max. inrush current:
165 A , 20 ms
800 A, 200 µs
Max. switched voltage: 440 VAC
Dielectric Strength
5000 Vrms coil to contact
(at sea level for 1 min.) 1250 Vrms between open contacts
Insulation
Resistance
1000 megaohms min. at 20°C
500 VDC 50% RH
Insulation
C250
Rated Load
(according to
DIN VDE 0110,
IEC 60664-1)
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
UL, CUR 16 A at 277 VAC, general use, 10k cycles, 85°C
2.2 A at 277 VAC, standard ballast, 10k cycles, 50°C
3000 W at 230 VAC, tungsten, 12k cycles, 40°C
1200 W at 277 VAC, tungsten, 6k cycles, 50°C
1200 W at 120 VAC, tungsten, 6k cycles, 50°C
TV-8 at 120 VAC, 25k cycles, 40°C
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 85°C (185°F)
Vibration
0.062” (1.5 mm) DA at 10-55 Hz
10 g
VDE
16 A at 250 VAC resistive, 30k cycles, 85°C
Silver tin oxide + tungsten
Shock
Material
Enclosure
P.B.T. polyester
tinned copper alloy, P.C.
270°C (518°F)
Resistance
< 100 milliohms initially
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
5 seconds
80°C (176°F)
30 seconds
COIL
13.5 grams
Power
Packing unit in pcs.
50 per tray / 500 per carton box
At Pickup Voltage
(typical)
196 mW (235 mW at 60 V and 110 V)
0.9 W at 20°C (68°F) ambient
Max. Continuous
NOTES
Dissipation
1. All values at 20°C (68°F).
Temperature Rise
26°C (47°F) at nominal coil voltage
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Temperature
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
10/2/14
