AZ830P
POLARIZED DIP RELAY
BISTABLE (LATCHING)
FEATURES
• High sensitivity, 86 mW pickup
• Low profile DIP package
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• Epoxy sealed for automatic wave soldering and cleaning
• DC coils to 48 VDC
• High switching capacity, 60 W, 125 VA
• Fits standard 16 pin IC socket
• UL file E43203
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
8
1 x 10
CONTACTS
5
1 x 10 at 2 A, 30 VDC or 1 A, 125 VAC
6
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
2 x 10 at 1 A, 30 VDC or .5 A, 125 VAC
Set Time (typical)
Reset Time (typical)
Capacitance
3 ms at nominal coil voltage
3.5 ms at nominal coil voltage
Ratings
Resistive load:
Max. switched power: 60 W or 125 VA
Max. switched current: 2 A
Max. switched voltage: 150 VDC or 300 VAC
Contact to contact: 1.0 pF
Contact set to contact: 1.0 pF
Contact to coil: 2.0 pF
Rated Load
UL
2 A at 30 VDC
1 A at 120 VAC
Bounce (typical)
At 10 mA contact current
1.5 ms at operate N.O. side
2.5 ms at operate N.C. side
Material
Silver alloy, gold clad.
< 50 milliohms initially
Dielectric Strength
(at sea level)
1500 Vrms contact to coil
1000 Vrms between contact sets
1000 Vrms across contacts
Resistance
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric
COIL (Polarized)
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
Power
50% RH
At Pickup Voltage
(typical)
Standard coil: 176 mW
Sensitive coil: 90 mW
Ultra-Sensitive coil: 86 mW
1.2 W at 20°C (68°F) ambient
0.9 W at 40°C (104°F) ambient
Standard: 38°C (68°F) at nominal coil voltage
Sensitive: 21°C (38°F) at nominal coil voltage
Ultra-Sensitive: 16°C (29°F) at nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
Standard: -40°C (-40°F) to 85°C (185°F)
Sensitive: -40°C (-40°F) to 95°C (203°F)
Ultra-Sensitive: 40°C (-40°F) to 100°C (212°F)
All: -40°C (-40°F) to 115°C (239°F)
Max. Continuous
Dissipation
Temperature Rise
Storage
Vibration
0.062" DA at 10–55 Hz
40 g
Shock
Temperature
Max. 115°C (239°F)
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
NOTES
Terminals
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. Relay adjustment may be affected if undue pressure is exerted
on relay case.
5. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
80°C (176°F)
30 seconds
5 grams
6. Specifications subject to change without notice.
7/17/07W
