CHIP TYPE TANTALUM SOLID ELECTROLYTIC CAPACITORS
Upgrade!
@Low ESR (1/2K1/3 compared with Mangan type Tantalum capacitors)
@Suitable for DC-DC converters, voltage regulators and decoupling applications
@Heat resistance to reflow soldering :
Peak temperature 250C, 230C 40seconds
@Pb-free type
?SPECIFICATIONS
Items
Characteristics
Category
Temperature Range
-
55C to +105C
Rated Voltage Range 2.5 to 10Vdc
Capacitance Range 33 to 680MF
(at 20C, 120Hz)
(at 20C after 5 minutes)
(at 20C, 120Hz)
Leakage Current
I=0.1CV (max.)
Where, I : Max. leakage current (MA), C : Nominal capacitance (MF), V : Rated voltage (Vdc
)
Dissipation Factor
(tane)
0.08 max. (10V : 0.10 max.)
Temperature
Characteristics
Temperature
-55C
-15 to 0%
+85C
+105C
Capacitance Change
0 to +20%
0 to +30%
[150% of the initial
specified value
1.0CV or less
[The initial specified
value
[150% of the initial
specified value
1.0CV or less
DF (tanE)
Leakage current
Humidity Test
Surge Voltage
The following specifications shall be satisfied when the capacitors are restored to 20C after subjecting them at 60C 90 to 95%RH
for 500 hours.
Capacitance change
DF (tanE)
-20% to +30%
[150% of the initial specified value
[300% of the initial specified value
Leakage current
The capacitors shall be subjected to 1000 cycles each consisting of charge with the surge voltage specified at 85C for 30 seconds
through a protective resistance(R=33O) and discharge for 5 minutes 30 seconds.
Capacitance change
DF (tanE)
[P20% of the initial value
[The initial specified value
[The initial specified value
Leakage current
Resistance
Reflow condition : Peak temperature 250CMax. 230C within 40 seconds.
of soldering heat
Capacitance change
DF (tanE)
[P10% of the initial value
[200% of the initial specified value
[300% of the initial specified value
Leakage current
Endurance
The following specifications shall be satisfied when the capacitors are restored to 20C after the rated voltage (10V : 8Vdc) is applied
for 1000 hours at 105C.
Capacitance change
DF (tanE)
[P20% of the initial value
[150% of the initial specified value
[The initial specified value
Leakage current
?DIMENSIONS [mm]
L
Unit : mm
Size code Previous size code
L
W
H
a
b
+
W
b
B12
B19
D19
D28
D38
B3
B2
D4
D6
D8
3.5P0.2 2.8P0.2 1.2Max. 0.8P0.3 2.2P0.2
3.5P0.2 2.8P0.2 1.9P0.1 0.8P0.3 2.2P0.2
7.3P0.2 4.3P0.2 1.9P0.1 1.3P0.2 2.4P0.2
7.3P0.2 4.3P0.2 2.8P0.2 1.3P0.2 2.4P0.2
7.3P0.2 4.3P0.2 3.8P0.2 1.3P0.2 2.4P0.2
a
a
(1/2)
CAT. No. E1002H
