Datasheet 187.50 MHz LVDS Oscillator
Package Outline and Dimensions
Typical PCB Land Pattern
3.20 ±0.05
1.00 ±0.05
Pin #1 ID
Chamfer
0.30 x 45°
2.60
0.85 ±0.05
0.0-0.05
0.64 ±0.05
VDD
OE
NC
6L SMD
OUT-
OUT+
5.00 ±0.05
5.0 x 3.2mm
1.27 Bsc
GND
1.08 ±0.05
0.90
0.203 Ref.
1.50
3.60
Pin #1 ID
R 0.15°
0.85 ±0.05
0.0-0.05
5.0 ±0.05
1.30 ±0.05
1.50 ±0.05
OE
NC
VDD
Pin Name
Description
1
2
3
4
5
6
OE
NC
GND
OUT+
OUT-
VDD
Output Enable*
No Connect
Ground
6L SMD
OUT-
OUT+
7.00 ±0.05
Output
Output
Power
7.0 x 5.0mm
2.54 Bsc
0.25 Ref
GND
* internally pulled high
1.60
1.60
0.203 Ref.
Unit: (mm)
Sales
Technical Support
6024 Silver Creek Valley Road
San Jose, California 95138
+1 408-284-8200
Fax: 408-360-1738
MEMS_Support@idt.com
www.idt.com/go/MEMS
DISCLAIMER Integrated Device Technology, Inc. (IDT) and its subsidiaries reserve the right to modify the products and/or specifications described herein at any time and at IDT’s sole discretion. All information in this document, including
descriptions of product features and performance, is subject to change without notice. Performance specifications and the operating parameters of the described products are determined in the independent state and are not guaranteed to perform
the same way when installed in customer products. The information contained herein is provided without representation or warranty of any kind, whether express or implied, including, but not limited to, the suitability of IDT’s products for any
particular purpose, an implied warranty of merchantability, or non-infringement of the intellectual property rights of others. This document is presented only as a guide and does not convey any license under intellectual property rights of IDT or any
third parties.
IDT’s products are not intended for use in life support systems or similar devices where the failure or malfunction of an IDT product can be reasonably expected to significantly affect the health or safety of users. Anyone using an IDT product in such
a manner does so at their own risk, absent an express, written agreement by IDT.
Integrated Device Technology, IDT and the IDT logo are registered trademarks of IDT. Other trademarks and service marks used herein, including protected names, logos and designs, are the property of IDT or their respective third party owners.
Copyright 2010, 2011, 2012. All rights reserved.
May 09, 2012
www.IDT.com
©2012 Integrated Device Technology, Inc
