HEAVY DUTY
ADVANCED ENGINEERING
Technical Data Sheet
Technical Data Sheet
Melt Point
ASTM D-2117
410°F (210°C)
ABRASION
Maximum Continuous
Abrasion Resistance
Extreme
Mil-I-23053
200°F (93.3°C)
Abrasion Test Machine
Taber 5150
Minimum Continuous
-60°F (-51.1°C)
Abrasion Test Wheel
Calibrase H-18
CHEMICAL
RESISTANCE
Abrasion Test Load
500g
1=No Effect
4=More Affected
2=Little Effect 5=Severely Affected
3=Affected
PHYSICAL
PROPERTIES
Monofilament Diameter__________NA
Flammability Rating _______________
Recommended Cutting _______Scissor
Colors _________________________ 1
Wall Thickness________________ .026”
Room Temperature
84°F
Humidity
74%
Aromatic Solvents ________________ 1
Aliphatic Solvents_________________ 1
Chlorinated Solvents ______________ 1
Weak Bases ______________________ 1
Salts____________________________ 1
Strong Bases _____________________ 2
Salt Water 0-S-1926________________ 1
Hydraulic Fluid MIL-H-5606 _________ 1
Lube Oil MIL-L-7808 _______________ 1
De-Icing Fluid MIL-A-8243 __________ 1
Strong Acids _____________________ 4
Strong Oxidants __________________ 4
Esters/Ketones ___________________ 1
UV Light ________________________ 1
Petroleum _______________________ 2
Fungus ASTM G-21 ________________ 1
Halogen Free ___________________ Yes
RoHS __________________________ Yes
SVHC _____________________________
First Signs Of Slight
Fraying
5,000 Test Cycles
Visible Small Hole In Ma-
terial
7,500 Test Cycles
Tensile Strength (Yarn) _____________
ASTM D-2256 Lbs
Specific Gravity ASTM D-792 _____1.13
Material Destroyed
8,500 Test Cycles
Moisture Absorption ____________ 2.7
% ASTM D-570
Hard Vacuum Data ________________
ASTM E-595 at 10-5 torr
Pre-Test Weight
6,903.10 mg
TML _________________________1.10
CVCM ________________________ .01
WVR__________________________ .69
Smoke D-Max __________________ 56
ASTM E-662
Post-Test Weight
5,911.80 mg
Test End Loss Of Mass
Point Of Destruction
991.30mg
Outgassing __________________ High
Oxygen Index __________________ 22
ASTM D-2863
© 2021 Techflex® - Any unauthorized reproduction, in whole or part, in any medium whatsoever, without the express written permission of Techflex® is strictly forbidden.
Techflex® product names and logos are registered trademarks of Techflex®, unless otherwise attributed. The contents and illustrations contained herein are believed to be reliable.
Techflex® makes no warranties as to their accuracy or completeness and disclaims any liability in connection with their use. Techflex’s® only obligations are those in standard terms
of sale for these products and Techflex® will not be liable for any consequential or other damages arising due to misuse of these products or typographical errors or omissions.
07-28
Users should make their own evaluation to determine the suitability of these products for their unique and specific applications.
