AZ762H
16 AMP HIGH TEMPERATURE
MINIATURE POWER RELAY
FEATURES
• Ambient Temperature up to 105°C (221°F)
• Sensitive coil
• Dielectric strength 5000 Vrms
• Low height: 15.7 mm
• 16 Amp switching
• Isolation spacing greater than 10 mm
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E44211
• VDE certificate 40006031
CONTACTS
GENERAL DATA
Arrangement
SPDT (1 Form C)
SPST (1 Form A)
Life Expectancy
Mechanical
Minimum operations
1 x 107
Electrical
(ohmic load at
105°C / 221°F)
1 x 105 at 16 A 250 VAC Res.
Ratings
Resistive load:
Max. switched power: 4000 VA
(Sensitive version: 2500 VA)
Max. switched current: 16 A
(Sensitive version: 10 A)
Max. switched voltage: 125 VDC* or 440 VAC
Operate Time (typical)
7 ms at nominal coil voltage
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.) 1000 Vrms between open contacts
5000 Vrms coil to contact
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Insulation
Resistance
1000 megaohms min. at 20°C
500 VDC 50% RH
Rated Load
UL, CUR
Insulation
C250
16 A at 277 VAC resistive, 100k cycles, 105°C
(standard coils) [2]
10 A at 277 VAC resistive, 100k cycles, 105°C
(sensitive coils) [1] [2]
(according to
DIN VDE 0110,
IEC 60664-1)
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
Dropout
Greater than 10% of nominal coil voltage
VDE
16 A at 250 VAC resistive, 50k cycles, 105°C
(standard coils) [2]
10 A at 250 VAC resistive, 50k cycles, 105°C
(sensitive coils) [2]
10 A at 250 VAC resistive, 30K cycles, 105°C
(sensitive coils) [1]
6 A at 400 VAC resistive, 100k cycles, 105°C
(sensitive coils) [1]
Ambient Temperature
Operating
At nominal coil voltage
-40°C (-40°F) to 105°C (221°F)
Vibration
0.062” (1.5 mm) DA at 10-55 Hz
10 g
Shock
Enclosure
P.B.T. polyester
tinned copper alloy, P.C.
270°C (518°F)
Terminals
Material
Silver cadmium oxide [1], silver nickel [2],
gold plating available
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Max. Immersion Time
Weight
Resistance
COIL
< 50 milliohms initially
5 seconds
80°C (176°F)
30 seconds
Power
At Pickup Voltage
(typical)
200 mW (235 mW at 60 V) standard coil
140 mW (160 mW at 60 V) sensitive coil
13.5 grams
Packing unit in pcs.
50 per tray / 500 per carton box
Max. Continuous
0.8 W at 20°C (68°F) ambient
Dissipation
Temperature Rise
26°C (47°F) at nominal coil voltage
(standard coil)
17°C (31°F) at nominal coil voltage
(sensitive coil)
NOTES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Temperature
Max. 130°C (266°F) Class B
Max. 155°C (311°F) Class F
ZETTLER electronics GmbH
Junkersstr. 3, D-82178 Puchheim, Germany
phone: +49 89 800 97-0 office@ZETTLERelectronics.com
fax:
+49 89 800 97-200 www.ZETTLERelectronics.com
This product specification to be used only together with the application notes
2013-02-27
which can be downloaded from http://www.ZETTLERelectronics.com/pdfs/relais/ApplicationNotes.pdf
