NON-
FECONNECTOR
1.25mm pitch/Connectors for FFC
Specifications –––––––––––––––––––
• Current rating: 1.0A AC, DC
• Voltage rating: 200V AC, DC
• Temperature range: -25˚C to+85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/20m Ω max.
After environmental testing/30m Ω max.
The FE connector ensures easy, secure
connection of flexible flat cables (FFC).
This compact connector is 4.8mm wide,
7.5mm high, and provides high contact
pressure even though little force is
required for insertion. The result is smooth
insertion and reliable contact performance.
The connector is useful in making
• Insulation resistance:
1,000M Ω min.
• Withstanding voltage: 500V AC/minute
• Applicable FFC:
Conductor pitch/1.25mm
Conductor width/0.8mm
Mating part thickness/0.3 0.05mm
Note: FFC to be actually used should be checked for applicability.
• Applicable PC board thickness: 1.2 to 1.6mm
* Compliant with RoHS.
* Refer to "General Instruction and Notice when using
Terminals and Connectors" at the end of this catalog.
* Contact JST for details.
personal computers, VCRs and car stereo
systems smaller and lighter.
• Low insertion force and high contact
pressure
• Snap-in connection
Standards ––––––––––––––––––––––
0 Recognized E60389
Certified LR20812
• Temporary board retention feature
1
PC board layout (viewed from component side) and Assembly layout
Top entry type
Side entry type
4.8
Contact
point
＋0.1
ꢀ0
1.25±0.05
φ0.8
1.25±0.05
＋0.1
ꢀ0
φ0.8
7.5
Contact
point
2.5±0.05
Circuit No.1
Circuit No.1
2.5±0.05
6.5
1.175
Note: 1. Tolerances are non-cumulative: 0.05mm for all centers.
2. Hole dimensions differ according to the kind of PC board and piercing method. The dimensions above should serve as a guideline. Contact JST for details.
1
