REVISION AV
QSS-XXX-XX-XXX-D-XXX
No OF POSITIONS
-025, -050, -075,
*-100, *-125
OPTION
-A: ALIGNMENT PINS
DO NOT
SCALE FROM
THIS PRINT
(USE QSS-25-XX-D-XX-A)
(NOT AVAILABLE WITH -LC)
-LC: LOCKING CLIPS (SEE NOTE 12)
(USE LC-08-TM-01, SEE FIG 2, SHT 2)
(NOT AVAILABLE WITH -A)
-K: POLYIMIDE FILM PAD
(USE K-DOT-.325-.450-.005)
(SEE FIG 3, SHT 2)
C
"A" REF
*SEE NOTES 11 & 14
LEAD STYLE
-01: .1430[3.632]
.7875 20.003 (TYP)
.2850 7.239
REF
02
PLATING SPECIFICATION
(SEE NOTES 8 & 11)
-F: 3µ" FLASH SELECTIVE GOLD IN
CONTACT AREA, MATTE TIN ON TAIL
(USE C-126-21-F & T-1G2-01-F)
(SEE NOTE 8)
-L: 10µ" LIGHT SELECTIVE GOLD, IN
CONTACT AREA, MATTE TIN ON TAIL
(USE C-126-21-L & T-1G2-01-L)
-H: 30µ" HEAVY GOLD IN CONTACT
AREA, 3µ" GOLD ON TAIL
(USE C-126-21-H & T-1G2-01-G)
-C: 50µ" HEAVY GOLD IN CONTACT
AREA, MATTE TIN ON TAIL
(USE C-126-21-C & T-1G2-01-L)
-STL: 30µ" HEAVY SELECTIVE GOLD IN
CONTACT AREA, TIN LEAD ON TAIL
(USE C-126-21-STL & T-1G2-01-STL)
-FTL: 3µ" FLASH SELECTIVE GOLD IN
CONTACT AREA, TIN LEAD ON TAIL
(USE C-126-21-FTL & T-1G2-01-FTL)
-TR: TAPE & REEL (75 POS MAX)
(50 POS MAX FOR -GP)
-GP: GUIDE POSTS
.2450 6.223
.144 3.66 REF
REF
(USE QSS-25-01-D-XX-X-GP)
(SEE FIG 4, SHT 3)
01
.006 0.15 REF
(NOT AVAILABLE WITH -LS2)
-LS2: LOCKING SCREW
(USE QSS-25-01-D-XX-LS2)
(SEE FIG 5, SHT 3)
.6250 15.875
REF
.0275 0.699
REF
24 EQ SPCS
@ .0250[0.635]
=.600[15.24]
(NOT AVAILABLE WITH -GP)
(FOR MATING WITH
QTS-...-RA-..LS2)
QSS-25-01-D-XX-A
"A"
.135 3.43
REF
ROW SPECIFICATION
-D: DOUBLE (USE QSS-25-XX-D-XX)
.0375 0.953
REF
No OF BANKS
"A"
.7250 18.415 REF
"B" REF
C
.0030 0.076 REF
.017±.005 0.44±0.13
(SEE NOTE 13)
+.003
-.001
+0.08
3.632
-0.03
.1430
T-1G2-01-XXX
+.004
+0.102
4.24
-0.051
.167
(SEE NOTE 6, 7, & 9)
-.002
C
C
SEE TABLE 1
.105 2.65 REF
(SEE NOTE 7 & 9)
C
.035 0.89 REF
.295 7.49
C-126-21-XXX
.070 1.765 REF
.0070 0.178 REF
SECTION "A"-"A"
SCALE 3 : 1
NOTES:
FIG 1
-A: ALIGNMENT PIN OPTION
(QSS-075-01-XXX-D-A SHOWN)
1. MINIMUM CONTACT RETENTION: 6 OZ
2. MINIMUM GROUND PLANE RETENTION: 8 OZ
C
3.
REPRESENTS A CRITICAL DIMENSION.
4. PARTS ARE MOLD TO POSITION.
5. NOTE DELETED.
6. MAXIMUM VARIANCE OF .002[0.05].
* = SEE NOTES 11 & 14
* = SEE NOTES 11 & 14
7. DIMENSION APPLIES TO CONTACTS AND GROUND PLANES, INDEPENDENT OF
GROUND PLANES AND CONTACTS RESPECTIVELY.
PROPRIETARY NOTE
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES[MM]
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
8. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
TOLERANCES ARE:
DECIMALS
9. GROUND PLANE PRESS HEIGHT MUST BE .003[0.08] LESS THAN THE MAX HEIGHT
OR .001[0.03] GREATER THAN THE MINIMUM HEIGHT OF THE TERMINALS.
10. NOTE DELETED.
ANGLES
2
.XX: .01[.3]
.XXX: .005[.13]
.XXXX: .0020.051]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
11. FOR -100 AND -125 POSITIONS USE C-269-11-X, DO NOT SUB C-126-01-X.
12. DUE TO THE HIGH AMOUNT OF INSERTION FORCE NEEDED, THE –LC OPTION
IS NOT COMPATIBLE WITH AUTO PLACEMENT. SAMTEC RECOMMENDS
MANUAL PLACEMENT FOR ALL ASSEMBLIES WITH THE –LC OPTION.
13. CHECK ONCE PER BANK ALTERNATING SIDES FOR MULTIPLE BANK PARTS.
14. AVAILABLE FOR EXISTING CUSTOMERS ONLY.
e-Mail info@SAMTEC.com
SHEET SCALE: 1.5:1
MATERIAL:
DO NOT SCALE DRAWING
DESCRIPTION:
INSULATOR: LCP, UL94V-0; COLOR: BLACK
CONTACT: PHOS BRONZE
GROUND PLANE: PHOS BRONZE
.635mm DOUBLE ROW HS SOCKET ASSEMBLY
DWG. NO.
QSS-XXX-XX-XXX-D-XXX
SHEET 1 OF 3
BY:
DEAN P
6/28/1999
F:\DWG\MISC\MKTG\QSS-XXX-XX-XXX-D-XXX-MKT.SLDDRW
