AZ830P
POLARIZED DIP RELAY
BISTABLE (LATCHING)
FEATURES
• High sensitivity, 90 mW pickup
• Low profile DIP package
• Meets FCC Part 68.302 1500 V lightning surge
• Meets FCC Part 68.304 1000 V dielectric
• Epoxy sealed
• DC coils to 48 VDC
• High switching capacity, 60 W, 125 VA
• Fits standard 16 pin IC socket
• UL file E43203; CSA file LR 36664
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
CONTACTS
1 x 108
1 x 105 at 2 A, 30 VDC or 1 A, 125 VAC
2 x 106 at 1 A, 30 VDC or .5 A, 125 VAC
Arrangement
DPDT (2 Form C)
Bifurcated crossbar contacts
Set Time (typical)
Reset Time (typical)
Capacitance
3 ms at nominal coil voltage
3.5 ms at nominal coil voltage
Ratings
Resistive load:
Max. switched power: 60 W or 125 VA
Max. switched current: 2 A
Max. switched voltage: 150 VDC or 300 VAC
Contact to contact: 1.0 pF
Contact set to contact: 1.0 pF
Contact to coil: 2.0 pF
Rated Load
UL
2 A at 30 VDC
1 A at 120 VAC
Bounce (typical)
At 10 mA contact current
1.5 ms at operate N.O. side
2.5 ms at operate N.C. side
Material
Silver alloy, gold clad. Silver palladium, gold clad
available upon request (not recommended for
current greater than 1 Amp).
Dielectric Strength
(at sea level)
1500 Vrms contact to coil
1000 Vrms between contact sets
1000 Vrms across contacts
Resistance
< 50 milliohms initially
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric
COIL (Polarized)
Insulation Resistance 1000 megohms min. at 20°C, 500 VDC,
Power
50% RH
At Pickup Voltage
(typical)
Max. Continuous
Dissipation
Standard coil: 176 mW
Sensitive coil: 90 mW
1.2 W at 20°C (68°F) ambient
Ambient Temperature At nominal coil voltage
Operating
Standard: -40°C (-40°F) to 85°C (185°F)
Sensitive: -40°C (-40°F) to 95°C (203°F)
Both: -40°C (-40°F) to 105°C (221°F)
Storage
Temperature Rise
Standard: 38°C (68°F) at nominal coil voltage
Sensitive: 21°C (38°F) at nominal coil voltage
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
40 g
Temperature
Max. 115°C (239°F)
Shock
Enclosure
P.B.T. polyester
Tinned copper alloy, P.C.
270°C (518°F)
NOTES
Terminals
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. Relay adjustment may be affected if undue pressure is exerted
on relay case.
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
5 seconds
80°C (176°F)
5. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
Max. Immersion Time 30 seconds
Weight
5 grams
6. Specifications subject to change without notice.
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2003-04-08
