AZ764H
16 AMP HIGH TEMPERATURE
MINIATURE POWER RELAY
FEATURES
• Ambient Temperature up to 105°C (221°F)
• Sensitive coil
• Dielectric strength 5000 Vrms
• Low height: 15.7 mm
• 16 Amp switching
• Isolation spacing greater than 10 mm
• Proof tracking index (PTI/CTI) 250
• Reinforced insulation, EN 60730-1 (VDE 0631, part 1)
EN 60335-1 (VDE 0700, part 1)
• UL, CUR file E43203
• VDE file 40012572
CONTACTS
GENERAL DATA
Arrangement
SPST (1 Form A)
Resistive load:
Life Expectancy
Mechanical
Electrical
Minimum operations
3 x 107
1.7 x 105 at 10 A 230 VAC res.
Ratings
(ohmic load at 2.8 x 105 at 8 A 230 VAC res.
105°C / 221°F) 3.2 x 105 at 6 A 230 VAC res.
Max. switched power: 480 W or 4000 VA
Max. switched current: 16 A
Max. switched voltage: 300 VDC* or 400 VAC
Operate Time (typical) 7 ms at nominal coil voltage
* Note: If switching voltage is greater than 30 VDC,
special precautions must be taken.
Please contact the factory.
Release Time (typical) 3 ms at nominal coil voltage
(with no coil suppression)
Rated Load
UL, CUR
Dielectric Strength
(at sea level for 1 min.) 1000 Vrms between open contacts
5000 Vrms coil to contact
10 A at 250 VAC general use
105 megohms min. at 20°C
500 VDC 50% RH
VDE
10 A at 250 VAC resistive, 105 °C, 150k cycles
16 A at 250 VAC resistive, 105 °C, 10k cycles
Insulation
Resistance
Material
Silver silver tin oxide
Insulation
C250
(according to
DIN VDE 0110,
IEC 60664-1)
Overvoltage category: III
Pollution degree: 3
Nominal voltage: 250 VAC
Resistance
< 100 milliohms initially
Dropout DC coils
Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage
COIL
Operating
Storage
-40°C (-40°F) to 105°C (221°F)
-40°C (-40°F) to 105°C (221°F)
Power
At Pickup Voltage
(typical)
140 mW (DC coil)
Vibration
20 g at 30…500 Hz
Shock
30 g
Max. Continuous
Dissipation
2.2 W at 20°C (68°F) ambient
Enclosure
P.B.T. polyester, UL-94 ; V0
Tinned copper alloy, P.C.
270°C (518°F)
Temperature Rise
Max. Temperature
16°C (29°F) at nominal coil voltage
155°C (311°F)
Terminals
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
5 seconds
80°C (176°F)
NOTES
Max. Immersion Time 30 seconds
1. All values at 20°C (68°F).
Weight
14 grams
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Packing unit in pcs
20 per carton tube / 1000 per carton box
ZETTLER electronics GmbH
Junkersstrasse 3, D-82178 Puchheim, Germany
Tel. +49 89 800 97 0
Fax +49 89 800 97 200
office@ZETTLERelectronics.com
www.ZETTLERelectronics.com
2005-08-04
