Part Number:
XZMD91W
www.SunLED.com
4.0x3.0mm RIGHT ANGLE SMD CHIP LED
LAMP
Recommended Soldering Pattern
(Units : mm;Tolerance:± 0.1)
The device has a single mounting surface. The device
must be mounted according to the specifications.
Tape Specification (Units : mm)
Remarks:
If special sorting is required (e.g. binning based on forward voltage, Luminous intensity / luminous flux, or wavelength),
the typical accuracy of the sorting process is as follows:
1. Wavelength: +/-1nm
2. Luminous intensity / luminous flux: +/-15%
3. Forward Voltage: +/-0.1V
Note: Accuracy may depend on the sorting parameters.
Published Date : FEB 27,2008
Drawing No : SDSA6425
V1
Checked : B.L.LIU
P.3/4
