SURFACE MOUNT GALSS PASSIVATED ZENER DIODE
Zener Voltage
11 to 200 Volts
1.5 Watts
MZ1.5PB11V-34.1 THRU MZ1.5PB200V-1.9
Steady state Power
FEATURES
DO-214AA(SMB)
·
For surface mounted applications in order to
Optimize board space
·
·
·
·
Low profile package
Built-in strain relief
Glass passivated junction
Low inductance
·
·
Typical IR less than 1μA above 11V
High temperature soldering:
260℃/10 seconds at terminals
Plastic package has Underwriters
Laboratory Flammability Classification 94V-O
·
MECHANICAL DATA
Dimensions in inches and (millimeters)
·
Cass: JEDEC DO-214AA,molded plastic over passivated
junction
·
Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026
·
·
·
Polarity: Color band denotes positive end (cathode)
Standard Packaging: 12mm tape (EIA-481)
Weight: 0.003 ounces, 0.93 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
·
Ratings at 25℃ ambient temperature unless otherwise specified
Symbols
Value
1.5
Unit
P
D
Watts
mw/℃
Amps
DC Power Dissipation @ TL=75℃, Measure at Zero Lead Length
(Note 1 Fig.1) Derate above 75℃
Peak forward Surge Current 8.3ms single half sine/square wave
Superimposed on rated load (JEDEC Method) (Notes 1.2)
15
IFSM
10
Operating junction and Storage Temperature Range
TJ, TSTG
-55to~+150
℃
Notes :
1. Mounted on 5.0mm2(.013mm thick) land areas
2. Measured on 8.3ms, single half sine-wave or equivalent square wave, duty cycle=4 pulses per minute maximum.