5KP SERIES
GGLLAASSSS PPAASSSSIIVVAATTEEDD JJUUNNCCTTIIOONN TTRRAANN--
SSIIEENNTT VVOOLLTTAAGGEE SSUUPPPPRREESSSSOORR
CCHHEENNGG--YYII
ELECTRONIC
VOLTAGE
5.0 to 110 VOLTS
5000 WATT PEAK PULSE POWER
P600
FEATURES
Plastic package has Underwrites Laboratory
Flammability Classification 94V-O
Glass passivated junction
5000W Peak Pulse Power capability on
10/1000 s waveform
Excellent clamping capability
Repetition rate (Duty Cycle):0.5%
Low incremental surge resistance
Fast response time: typically less than 1.0 ps
from 0 volts to BV
Typical ID less than 1 A above 10V
High temperature soldering guaranteed:
o
300 C/10 seconds /.375',(9.5mm)
lead length/51bs.,(2.3kg) tension
MECHANICAL DATA
Case:Molded plastic over glass passivated junction
Terminals:Plated Axial leads, solderable per MIL-STD-750, Method 2026
Polarity:Color band denote positive end (cathode)
Mounting Position:Any
Weight:0.07 ounces, 2.1gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
0
Ratings at 25 C ambient temperature unless otherwise specified.
RATINGS
SYMBOL
VALUE
UNITS
Watts
Amps
Peak Pulse Power Dissipation on 10/1000 s waveform (NOTE 1,Fig.1)
Peak Pulse Current of on 10/1000 s waveform (NOTE 1,Fig.3)
PPPM
Minimum 5000
SEE TABLE 1
PPPM
0
Steady Power Dissipation at TL=75 C
PM(AV)
8.0
Watts
Lead Lengths .375",(9.5mm)(NOTE 2)
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load(JEDEC Method)(NOTE 3)
Amps
IFSM
400
0
Operating Junction and Storage Temperature Range
TJ, TSTG
-55 to + 175
C
o
Notes: 1. Non-repetitive current pulse, per Fig.3 and derated above TA=25C per Fig.2
2
2
2. Mounted on Copper Leaf area of 0.79 in (20mm )
3. Measured on 8.3ms single half sine-wave or equivalent square wave,
Duty Cycle=4 pulses per minuters maximum.
