AZ9402
10 AMP MINIATURE
POWER RELAY
FEATURES
• 10 Amp switching capability
• SPST-N.O. and SPDT configurations
• Epoxy sealed version available
• UL, CUR E44211
• TUV pending
GENERAL DATA
CONTACTS
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 107
1 x 105 at 10 A 120 VAC Res.
Arrangement SPST N.O. (1 Form A)
SPDT (1 Form C)
Operate Time (max.)
Release Time (max.)
8 ms at nominal coil voltage
Ratings Resistive load:
5 ms at nominal coil voltage
(with no coil suppression)
Max. switched power: 150 W or 1250 VA N.O.
Max. switched current:10 A
Max. switched voltage: 30 VDC* or 277 VAC
Dielectric Strength
(at sea level for 1 min.) 4000 Vrms contact to coil
1000 Vrms contact to contact
*Note: If switching voltage is greater than 30 VDC, special
precautions must be taken. Please contact the factory.
Insulation Resistance 1 x 109 ohms minimum at 500 VDC
Dropout
Greater than 5%of nominal coil voltage
UL, CUR
5A at 250 VAC
10A at 125 VAC
4.2A at 277 VAC
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C (-40°F) to 70°C (158°F)
1/4 HP at 120/240/277 VAC
-40°C (-40°F) to 130°C (266°F)
0.062" DA at 10–55 Hz
TV- 5 at 120 VAC
Vibration
Shock
Pilot Duty at 24 VA, 24 VAC ;125 VA at
120/240/277 VAC ; C150 at 120 VAC
Mechanical
100 g for 11 ms 1/2 sine pulse
P.B.T. polyester
TUV
5A at 250 VAC
5A at 28 VDC
Enclosure
Terminals
Tinned copper alloy, P.C.
270°C (518°F)
5 seconds
Material Silver Nickel
Max. Solder Temp.
Max. Solder Time
Max. Solvent Temp.
Resistance
< 0.1 Ohm
(24 V, 1 A voltage drop method)
80°C (176°F)
Max. Immersion Time 30 seconds
COIL
Weight
7 grams
Power
At Pickup Voltage
(typical)
253 mW (Standard Coil)
113 mW (Sensitive Coil)
Max. Continuous
Dissipation
1.25 W at 20°C (68°F)
NOTES
1. All values at 20°C (68°F).
Temperature Rise
40°C (72°F) (Standard Coil)
20°C (36°F) (Sensitive Coil)
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
Temperature
Max. 105°C (221°F)
4/02/09W
