AZ9571
SUBMINIATURE
PC BOARD RELAY
FEATURES
• Subminiature size for high density packaging
• Epoxy sealed for automatic wave soldering
• High sensitivity: 150 mW nominal with 96 mW pickup
• UL, CUR E43203
GENERAL DATA
Life Expectancy
Mechanical
Electrical
Minimum operations
10 million operations
1 x 105 at 0.5A 120 VAC Res.
Operate Time (typical) 5 ms at nominal coil voltage
CONTACTS
Arrangement
SPDT (1 Form C)
Release Time (typical) 5 ms at nominal coil voltage
(with no coil suppression)
Ratings
Resistive load:
Capacitance
Coil to contact: 7.0 pF
Max. switched power: 30 W or 62.5 VA
Max. switched current: 1 A
Max. switched voltage: 60 VDC or 125 VAC
UL Rating: 1 A at 30 VDC
0.3 A at 60 VDC
Contact to contact: 7.0 pF
Bounce (typical)
At 10 mA contact current
2 ms at operate
8 ms at release
0.5 A at 125 VAC
Dielectric Strength
(at sea level for 1 min.) 400 Vrms between open contacts
1000 Vrms coil to contact
Material
Silver gold clad
Resistance
< 100 milliohms initially (6 V 1 A method)
Insulation
Resistance
100 megohms min. at 20°C, 500 VDC,
50% RH
COIL
Dropout
Greater than 10% of nominal coil voltage
Power
At Pickup Voltage
(typical)
Standard coil:128 mW
Sensitive coil: 96 mW
Ambient Temperature At nominal coil voltage
Operating
-40°C (-40°F) to 70°C (158°F)
Max. Continuous
Dissipation
.5 W at 20°C (68°F) ambient
Storage
-25°C (-13°F) to 105°C (221°F)
3.3 mm DA at 10–55 Hz
10 g Functional, 100g destructive
P.E.T. polyester
Temperature Rise
Standard: 33°C (59°F) at nominal
coil voltage
Sensitive: 25°C (45°F) at nominal
coil voltage
Vibration
Shock
Enclosure
Temperature
Max. 105°C (221°F)
Terminals
Tinned copper alloy
270°C (518°F)
Max. Solder Temp.
Max. Solder Time
NOTES
5 seconds
1. All values at 20°C (68°F).
Max. Immersion Time 30 seconds
Weight 2.2 grams
2. Relay may pull in with less than “Must Operate” value.
3. Other coil resistances and sensitivities available upon request.
4. Specifications subject to change without notice.
4/02/09W
