AZ989
25 AMP SUB-MICRO
AUTOMOTIVE RELAY
FEATURES
• Up to 25 Amp switching capability in a very compact size
• Vibration and shock resistant
• Designed for power windows, door locks and
wiper motors, seat adjusters, and more
• Epoxy sealed for automatic wave soldering
• ISO/TS 16949, ISO9001, ISO14000
• Tested in accordance with SAE J2544
• Cost effective
• Single and Dual (Twin) relay versions
GENERAL DATA
CONTACTS
Life Expectancy
Mechanical
Electrical
Minimum operations
1 x 106
1 x 105 at 25 A 14 VDC locked motor
Arrangement
Ratings
SPDT (1 Form C) DPDT (2 Form C) (Twin)
Resistive load:
Operate Time
Release Time
3 ms typical at nominal coil voltage
Max. switched power: 400 W
Max. switched current: 25 A
Max. switched voltage: 16 VDC
1.5 ms typical at nominal coil voltage
(with no coil suppression)
Rated load: 25 A at 16 VDC, locked motor
Silver tin oxide
Dielectric Strength
(at sea level for 1 min.) 500 VAC between open contacts
500 VAC coil to contact
Material
Resistance
< 25 milliohms initially
(6 V, 1 A voltage drop method)
Insulation Resistance 100 megohms min. at 20°C, 500 VDC
50% RH
Dropout
Greater than 8.3% of nominal coil voltage
Ambient Temperature At nominal coil voltage
Operating
Storage
-40°C (-40°F) to 85°C (185°F)
-40°C (-40°F) to 155°C (311°F)
COIL
Power
Vibration
5g at 10-500 Hz
At Pickup Voltage
(typical)
230 mW
Shock
10g operational, 100g destructive
P.B.T. polyester
Max. Continuous
Dissipation
2.2 W at 20°C (68°F) ambient
Enclosure
Terminals
Tinned copper alloy, P.C.
270°C (518°F)
Temperature Rise
Max Temperature
40°C (72°F) at nominal coil voltage
155°C (311°F)
Max. Solder Temp
Max. Solder Time
Max. Solvent Temp
5 seconds
NOTES
80°C (176°F)
1. All values at 20°C (68°F).
Max. Immersion Time
Weight
30 Seconds
4 grams
2. Relay may pull in with less than “Must Operate” value.
3. Specifications subject to change without notice.
1/24/06W
