5KP SERIES
TRANSIENT VOLTAGE
SUPPRESSOR
BR
AR - L
PPK : 5000 Watts
FEATURES :
0.053 (1.35)
0.050 (1.27)
* 5000W Peak Pulse Power
* Excellent clamping capability
* Low incremental surge resistance
* Fast response time : typically less
then 1.0 ps from 0 volt to VBR(min.)
0.250 (6.4)
0.235 (6.0)
m
* Typical IR less then 1 A above 10V
1.00 (25.4)
0.410 (10.4)
0.380 (9.70)
MIN.
MECHANICAL DATA
* Case : Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
Dimensions in inches and ( millimeter )
* Polarity : Cathode polarity band
* Mounting position : Any
* Weight : 2.73 grams
DEVICES FOR BIPOLAR APPLICATIONS
For Bi-directional use C or CA Suffix
Electrical characteristics apply in both directions
MAXIMUM RATINGS
°
Rating at 25 C ambient temperature unless otherwise specified.
Rating
Peak Pulse Power Dissipation at tp = 1ms
(Note 1, Fig. 4)
Symbol
Value
Unit
PPK
Minimum 5000
Watts
L
°
Steady State Power Dissipation at T = 75 C
Lead Lengths 0.375", (9.5mm) (Note 2)
Peak Forward Surge Current, 8.3ms Single Half
Sine-Wave Superimposed on Rated Load
(JEDEC Method) (Note 3)
PD
8.0
Watts
Amps.
IFSM
400
Operating and Storage Temperature Range
TJ, TSTG
- 55 to + 150
°
C
Note :
°
(1) Non-repetitive Current pulse, per Fig. 5 and derated above Ta = 25 C per Fig. 1
(2) Mounted on Copper Leaf area of 0.79 in (20mm2).
2
(3) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minutes maximum.
UPDATE : SEPTEMBER 6, 2001