WV3HG264M64EEU-D6
White Electronic Designs
ADVANCED
DDR2 ICC SPECIFICATIONS AND CONDITIONS
Symbol Proposed Conditions
Operating one bank active-precharge current;
806
665
534
403
Units
ICC0*
t
CK = tCK(ICCꢀ, tRC = tRC(ICCꢀ, tRAS = tRASmin(ICCꢀ; CKE is HIGH, CS# is HIGH between valid
744
704
704
mA
TBD
commands; Address bus inputs are SWITCHING; Data bus inputs are SWITCHING
Operating one bank active-read-precharge current;
IOUT = 0mA; BL = 4, CL = CL(ICCꢀ, AL = 0; tCK = tCK(ICCꢀ, tRC = tRC (ICCꢀ, tRAS = tRAS MIN(ICCꢀ,
tRCD = tRCD(ICCꢀ; CKE is HIGH, CS# is HIGH between valid commands; Address bus inputs
are SWITCHING; Data pattern is same as ICC4W
ICC1*
864
824
824
mA
TBD
Precharge power-down current;
ICC2P** All banks idle; tCK = tCK(ICCꢀ; CKE is LOW; Other control and address bus inputs are STABLE;
Data bus inputs are FLOATING
128
560
640
128
480
560
128
480
560
mA
mA
mA
TBD
TBD
TBD
Precharge quiet standby current;
ICC2Q** All banks idle; tCK = tCK(ICCꢀ; CKE is HIGH, CS# is HIGH; Other control and address bus
inputs are STABLE; Data bus inputs are FLOATING
Precharge standby current;
ICC2N** All banks idle; tCK = tCK(ICCꢀ; CKE is HIGH, CS# is HIGH; Other control and address bus
inputs are SWITCHING; Data bus inputs are SWITCHING
Active power-down current;
Fast PDN Exit MRS(12ꢀ = 0
480
192
480
192
480
192
mA
mA
TBD
TBD
All banks open; tCK = tCK(ICCꢀ; CKE is LOW; Other control
and address bus inputs are STABLE; Data bus inputs are
FLOATING
ICC3P**
ICC3N**
ICC4W**
ICC4R*
ICC5B**
ICC6*
Slow PDN Exit MRS(12ꢀ = 1
Active standby current;
All banks open; tCK = tCK(ICCꢀ, tRC = tRC(ICCꢀ, tRAS = tRAS MIN(ICCꢀ; CKE is HIGH, CS# is HIGH
between valid commands; Other control and address bus inputs are SWITCHING; Data bus
inputs are SWITCHING
880
1184
1224
2400
128
800
1024
1064
2240
128
800
944
mA
mA
mA
mA
mA
TBD
TBD
TBD
TBD
TBD
Operating burst write current;
All banks open, Continuous burst writes; BL = 4, CL = CL(ICCꢀ, AL = 0; tCK = tCK(ICCꢀ, tRAS
=
tRAS MAX(ICCꢀ, tRP = tRP(ICCꢀ; CKE is HIGH, CS# is HIGH between valid commands; Address
bus inputs are SWITCHING; Data bus inputs are SWITCHING
Operating burst read current;
All banks open, Continuous burst reads, IOUT = 0mA; BL = 4, CL = CL(ICCꢀ, AL = 0; tCK
= tCK(ICCꢀ, tRAS = tRAS MAX(ICCꢀ, tRP = tRP(ICCꢀ; CKE is HIGH, CS# is HIGH between valid
commands; Address bus inputs are SWITCHING; Data pattern is same as ICC4W
944
Burst auto refresh current;
tCK = tCK(ICCꢀ; Refresh command at every tRFC(ICCꢀ interval; CKE is HIGH, CS# is HIGH
between valid commands; Other control and address bus inputs are SWITCHING; Data bus
inputs are SWITCHING
2240
128
Self refresh current;
CK and CK# at 0V; CKE 0.2V; Other control and
Normal
address bus inputs are FLOATING; Data bus inputs are
FLOATING
Operating bank interleave read current;
All bank interleaving reads, IOUT = 0mA; BL = 4, CL = CL(ICCꢀ, AL = tRCD(ICCꢀ-1*tCK(ICCꢀ; tCK
tCK(ICCꢀ, tRC = tRC(ICCꢀ, tRRD = tRRD(ICCꢀ, tRCD = 1*tCK(ICCꢀ; CKE is HIGH, CS# is HIGH between
valid commands; Address bus inputs are STABLE during DESELECTs; Data bus inputs are
switching.
=
ICC7*
1824
1824
1824
mA
TBD
* Value calculated as one module rank in thes operating condition, and all other module ranks in ICC2P (CKE LOWꢀ mode.
** Value calculated reflects all module ranks in this operating condition
NOTES:
• ICC specifications were calculated using SAMSUNG components. Other manufactures DRAMs may have different values.
December 2005
Rev. 0
6
White Electronic Designs Corporation • (602) 437-1520 • www.wedc.com