PXAC182002FC V1
Revision History
Revision
Date
Data Sheet Type
Advance
Page
Subjects (major changes since last revision)
01
02
2014-09-23
2015-03-24
All
Data Sheet reflects advance specification for product development
Production
All
All
Data Sheet reflects released product specification
Revised all data and includes updated final specs, typical performance graphs, loadpull, refer-
ence circuit, package outline
02.1
02.2
2015-05-20
2015-06-05
Production
Production
1
1
Updated single-carrier WCDMA test spec
Corrected I/O in description paragraph, removed f from single-carrier WCDMA test spec condi-
1
tion
02.3
2016-06-17
Production
1, 2
Updated ESD rating and ordering information to include R0
We Listen toYour Comments
Any information within this document that you feel is wrong, unclear or missing at all?
Your feedback will help us to continuously improve the quality of this document.
Please send your proposal (including a reference to this document) to:
(highpowerRF@infineon.com)
To request other information, contact us at:
+1 877 465 3667 (1-877-GO-LDMOS) USA
or +1 408 776 0600 International
Edition 2016-06-17
Published by
Infineon Technologies AG
85579 Neubiberg, Germany
© 2014 Infineon Technologies AG
All Rights Reserved.
Legal Disclaimer
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics.
With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the
application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind,
including without limitation, warranties of non-infringement of intellectual property rights of any third party.
Information
For further information on technology, delivery terms and conditions and prices, please contact the nearest
Infineon Technologies Office (www.infineon.com/rfpower).
Warnings
Due to technical requirements, components may contain dangerous substances. For information on the types in question,
please contact the nearest Infineon Technologies Office.
Infineon Technologies components may be used in life-support devices or systems only with the express written approval of In-
fineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device
or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be
implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is
reasonable to assume that the health of the user or other persons may be endangered.
Data Sheet
8 of 8
Rev. 02.3, 2016-06-17