PRODUCT DATASHEET
Mechanical – SynJet Cooler
All dimensions are nominal and in
mm unless otherwise stated.
SynJet Wire Harness
Connector Pinout
Pin
1
2
Wire Color
Red
Symbol Description
+VDC
GND
5 V or 12 V depending on model
Ground
Black
Input for Level Select model
Status signal for PWM model
Input for Level Select model
PWM input for PWM model
3
4
Purple
Blue
CTRL2
CTRL1
IMPORTANT: SynJets should be completely wired to the power supply before the power supply is energized. The power supply should be
turned off before the SynJet Cooler is disconnected. SynJet Coolers are not designed for “hot swap” or “hot plug” applications.
Part Numbers
Notes
Part Number
Description
SynJet, ZFlow 90, Outdoor, Level Select, 5V, 600 mm
wire harness
NX200105
Hard wired performance settings
SynJet, ZFlow 90, Outdoor, PWM, 5V, 600 mm wire
harness
SynJet, ZFlow 90, Outdoor, Level Select, 12V, 600 mm
wire harness
SynJet, ZFlow 90, Outdoor, PWM, 12V, 600 mm wire
harness
NX200106
NX200107
NX200108
Use with PWM input to control performance setting
Hard wired performance settings
Use with PWM input to control performance setting
Nuventix reserves the right to make changes to the products or information contained herein without notice. No
liability is assumed as a result of their use or applications. For additional information, please contact Nuventix directly.
4635 Boston Lane
Austin, TX 78735
Phone: 512-382-8100
www.nuventix.com
MKTG-DOC-00199
Revision
E01
Aug 2012 r1
