1
Meter
XPart TNo. XT-HOS-1m
Quick-test XT 10,000 psi hose, S.S. hose ends, 1 meter long
10,000 psi (689 bar) working pressure Microbore hoses that provide a very quick, low
volume, high pressure way of connecting to any pressure instrumentation, hand pump,
calibration source or device under test
Features
•
•
•
•
•
•
•
•
Low volume reduces the pumping effort or compressed gas usage in pressure calibration
No thread sealant required – connect to adapters without wrenches, thread sealant or thread tape
Bubble tight connections to 10000 psi (689 bar) with no moving parts reduces maintenance to almost zero
Hose is hard to break and very flexible
Adapt from hose to virtually any device under test with only one connection
A corrosion resistant strain-relief on each hose end reduces wear and dramatically increases hose life
Note that these hoses are NOT compatible with QTHA adapters. Please use XTHA adapters
Made in USA
Specifications
Length
1 m
Pressure Range
Burst Pressure
End 1
0 to 10000 psi (0 to 689 bar)
40000 psi (2,756 bar)
Female Quick-test XT, stainless steel
End 2
Female Quick-test XT, stainless steel
Temperature range
Outer Diameter
Inner Diameter
Minimum Bend Radius
Color
0 to 140 °F (-18 to 60 °C)
0.24 in (6.1 mm)
0.08 in (2.0 mm)
1 in (25.4 mm)
Blue
Construction
End materials
Fluid Media
Polyamide core tube, High tensile synthetic fiber and polyamide outer cover
Stainless Steel
Air, Inert Gas, Natural Gas, Petroleum Based Oil, Water
Ralston Instruments Inc. | ralstoninst.com | Toll Free 800-347-6575 | Phone 440-564-1430 | Fax 440-564-1480
